The Building of the Marmion

By Robert Pitt

My mother’s father, Richard Hoyle Rice, was born in Benson, Arizona, and came to Florida as a boy with his father. He was obsessed with boats, as was shown in his school books from 9th grade geography class, which he had decorated with drawings of ketches and schooners. He worked with his father doing farming and grove work. In the early 1920’s he made three quarters of a million dollars in an investment and decided to build boats, so he began Coral Grove Boat Works at 2550 South Bayshore Road on Biscayne Bay.

Richard hired a boat builder by the name of Walter Miller, and also hired a respected Bahamian boat builder by the name of Asa Smith from Flagler Grove. Together they built many lighters for off-loading cargo in the shallow waters of the crowded harbor during the Boom.

In 1925, Richard bought plans for a 55-foot ketch from naval architect L.D. Huntingdon. He brought the plans to the yard where the crew looked them over, and deemed her fast; however, Asa claimed that the rig was backwards. She was a ketch, not a schooner. The plans were promptly changed. Once that was agreed on, Asa carved a half hull model out of gumbo limbo, using the traditional way of Bahamian boat design.

A crew went south and west to Flamingo with the builders to get the timbers. Little Madeira Bay was the first stop. They collected Horseflesh for the stem, forefoot and keel, Jamaican dogwood, and Madeira mahogany for the frames and the decking. All the timber was piled on a barge and shipped back to Biscayne Bay. The timber was then immersed in the water at low tide and chained to coral rocks. At high tide, a tug was used to submerse them in deeper water. As the depth increased, the pressure forced fresh water and sap out of the timbers. This was primitive third world pressure treating!

At the same time, long leaf Dade County pine was cut near Homestead. This was full-length planking with no butts. The wood was then taken to a grove and stickered under the trees to air dry. Within six months, the sunken wood was retrieved from the Bay, and building began.

The keel was laid, and then the forefoot, stem and horn timbers followed. Futtocks of dogwood and madeira were fastened together and raised on stations, not by measurement, but by my mother eye balling the location. My Uncle Tony declared that the boat resembled the model. Planking and decking continued using iron for fasteners.

Spars were originally intended to be sand pine, a lighter yellow pine, but Richard opted for spruce, so he and his son went to Annapolis to get some.

The construction continued and the unnamed boat was almost ready for launch in September 1926, when a hurricane arrived washing most of the boats in the area way inland, crushing and sinking them. Richard was devastated. He sold his pride and joy to Hugh Mathison. Hugh paid to have the boat moved back to the yard where she was completed. He named the boat Marmion.She went on to win her class in the 1936 and 1938 St. Petersburg to Havana Race.

Later, she was moved to New England and became a whale watch vessel before sinking in her slip in the 1980’s. Rest in peace, Marmion!